| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Used drum sander price and opinion sought http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=44412 |
Page 1 of 1 |
| Author: | Dave Livermore [ Sat Oct 25, 2014 12:53 pm ] |
| Post subject: | Used drum sander price and opinion sought |
I have the opportunity to buy a used Crafstman 18/36 drum sander (model 31-250) for $600. Assuming it is in good shape, is this a good sander and is this a fair price? Thanks for any info you can share Dave |
|
| Author: | ernie [ Sat Oct 25, 2014 1:11 pm ] |
| Post subject: | Re: Used drum sander price and opinion sought |
I would look for a machine of better quality and spend more $$$. Can you find reviews for this craftsman sander?? |
|
| Author: | Chuck R [ Sat Oct 25, 2014 1:24 pm ] |
| Post subject: | Re: Used drum sander price and opinion sought |
I'd wait and keep checking Craigslist. I picked up a used delta 18-36 in June for $250. The delta can be tricky to set up, but it does the job. |
|
| Author: | Glen H [ Sat Oct 25, 2014 1:38 pm ] |
| Post subject: | Re: Used drum sander price and opinion sought |
I am suspecting that the Sears model is the same delta. Not sure though. Sent from my iPhone using Tapatalk |
|
| Author: | Pmaj7 [ Sat Oct 25, 2014 3:05 pm ] |
| Post subject: | Re: Used drum sander price and opinion sought |
600 would be a decent price for a known reliable Sander. jet, Delta. Craftsman?.........hmmmmmm |
|
| Author: | Toonces [ Sat Oct 25, 2014 4:44 pm ] |
| Post subject: | Re: Used drum sander price and opinion sought |
You should never pay more than about 60% for used equipment. Thickness sanders are very useful for lutherie -- I would suggest going to an industrial auction site and spending around $1500 for a machine that is much more capable and reliable. |
|
| Author: | Mike OMelia [ Sat Oct 25, 2014 7:19 pm ] |
| Post subject: | Re: Used drum sander price and opinion sought |
Performax, Jet. If you watch posts here, you will notice when it comes to drum sanders, they are preferred. Delta once in a while, if u like adjustable bed sanders. That price u mentioned is too high. Google comparable new jets and performax. |
|
| Author: | George L [ Sun Oct 26, 2014 9:45 am ] |
| Post subject: | Re: Used drum sander price and opinion sought |
I don't know for sure, but I've read that these are re-badged Grizzly sanders, which tend to receive generally positive reviews. However, the $600 price seems high to me as well. Like the cat, I agree with the 60% ceiling for used. The drum sander, bandsaw and dust collector out in my workshop support this theory. |
|
| Author: | dnf777 [ Sun Oct 26, 2014 6:14 pm ] |
| Post subject: | Re: Used drum sander price and opinion sought |
I just researched many brands and models, and bought a Powermax 19/38. Did find a little on Craftsman, which was neutral. Given that, not sure I'd spring 600, even for a NIB used. FWIW, the powermax came out of the box sanding so even, my thickness caliper can't detect a difference across the entire surface. Bad news, is I haven't had to make any adjustments yet, so I don't know how easy/difficult that will be! |
|
| Author: | Dave Livermore [ Sun Oct 26, 2014 9:35 pm ] |
| Post subject: | Re: Used drum sander price and opinion sought |
Spent a little time on Craigslist searching the midwest for drum sanders. There are about five Craftsman, all for about $600. Not much else out there for less than that out there right now. I do agree that it is priced high. If I NEEDED one I would jump on it. But I built one that works and can wait. If I could just figure out a way to make a conveyor, I would be in business. |
|
| Author: | Clay S. [ Mon Oct 27, 2014 3:55 am ] |
| Post subject: | Re: Used drum sander price and opinion sought |
It seems like someone rigged up a second hand treadmill for a conveyor..... But my memory is not the best. |
|
| Author: | Chris Ensor [ Mon Oct 27, 2014 8:39 am ] |
| Post subject: | Re: Used drum sander price and opinion sought |
Dave, I don't know where in the midwest you are, but I bough a grizzly wide belt at the scratch and dent sale this past summer and if you are close, it might be worth the trip next year. The prices vary depending on the damage, but I saw some for around what you are talking about for a craftsman drum sander. I got mine for a silly price...  and it works great!
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|